Norwesco Lids

HIGH DENSITY POLYETHYLENE LIDS
Item Description Part Number Std. Pkg.
- 16" Lid and ring with 4" center lid/air vent 60038 16
A 16" Lid with 4" center lid/air vent 60011 10
- 16" Ring only 60012 -
- 16" Lid, ventless with ring 60367 10
B 16" Lid, ventless 60365 -
- Ethafoam gasket for 16" non-hinged lid 62941 -
- 4" Lid (air vent assembly for 16" lid) 60019 10/Bag
- 8" Lid, ring & air vent 60032 32
C 8" Lid with air vent 60002 32
- 8" Ring only 60003 -
- Snap on air vent for 8" lid 61727 130
D 5" Lid with ball check air vent (for tanks manufactured prior to 2/1/00) 60322 72
E 5” Lid with ball check air vent (for tanks manufactured after 2/1/00) 63484 48
- EPDM gasket for 5" lids 60322, 63264 or 63484 60366 -
- 5" lid with 2" FPT (does not include vent cap) 63264 45
- 2" MPT vent cap with poly screen 63266 100
- 18" lanyard for 8" lid and 16" non-hinged lid
(tethers lid to tank)
 63251 500/Bundle
- Stainless steel screw for 8" and 16" rings
60081
-
- Strainer basket for 16" fill-opening (7" depth)
67374
-

Hinged Lids 

The hinged lid is manufactured from a co-polymer material for strength, durability and excellent chemical resistance. Our unique locking tab allows you to easily slip a padlock through it and secure your lid from theft or spills. The lid is interchangeable with a standard 16" lid and ring assembly if you choose to replace your existing lid.

Specific features of the lid:

  • Easy open/close - opens a full 180 degrees
  • Comes complete with a baffle vent assembly which allows for adequate venting when bottom filling your tank
  • Unique locking tab
  • All parts of lid may be ordered as repair parts
HINGED LIDS
Description Part Number Std
Pkg
Complete lid assembly 62532 6

HINGED LIDS REPAIR PARTS
Description Part Number Std
Pkg
16" hinged lid with vent assembly, without ring 62826 6
16" Hinged lid, ventless 63390
-
Vent assembly 62827 8
Ring Assembly 62828 -
Hinge Assembly 62829 -
*EPDM gasket 63391
-
**EPDM O-ring for lid 62830 100
Neoprene O-ring for ring 62831 25
*Lid with red center cap or ventless lid requires this gasket.
**Lid with black center cap requires this o-ring.

Part dimensions may vary and are subject to change without notice. 

 
 

Ace Roto Mold Tanks | Banjo Products | Norwesco Tanks | Marine Products | AG Tank II | Apache Hose | Admin Email Login

Copyright 2011 Advanced Tank Technologies
All Rights Reserved